Automatic Corrugation Plant-5 Ply Unit

Product Details:

Structural Features:
1.Vacuum adsorption, with a high-pressure blower. With wind control device machine suction silencer; electrical control box to focus on the same host, not less than 1.5 m, the operating side of the closed side of the hood.
2.Universal joint drive, Separation structure, Independent drive box, Enclosed gear oil immersion type lubrication, can prolong the life of the gearing.
3.Corrugated roller diameter 280mm, adopt 48CrMo high quality ally steel, after quenching and tempering, hardening, polished surface chrome plated hardness of HRC60 degrees, the cylinder control up and down.
4.Pressure roller diameter 280mm. Modulation processing with carbon steel, machining and grinding off the surface chrome plated cylinder control up and down.
5.Upper and lower Preheat roll diameter 320mm, machining and grinding off the surface hard chrome plated, all metal hose connection.
6.Pneumatic control glue, glue roller diameter 215mm, engraved with the pit-style textured back surface polished, hard chrome plated, transfer roller surface machining and grinding off the hard chrome plating.
7.Corrugated roller bearings with high temperature and pressure grease lubricated bearings.
8.Corrugated roller unilateral high 0.10 mm, pressure roller unilateral high 0.075 mm. Add spacing device, pressure cylinder for Ø 160 mm.

Product Details:

Structure Features:

1.Symmetric structure can also install two original paper rolls, paper for non-stop for the job.
2.Hydraulic drive, to be completed by paper lift, clamp, loosen, move the pair.
3.Pneumatic tension adjustment paper tension. Jam head with automatic expansion.
4.Muti-point type tension control pneumatic brakes, but also with splicer line control.

Product Details:

Structural Features:
1.Preheat cylinder pressure vessel meets a national standard, together with the pressure vessel certificate and inspection certificate.
 2.Preheat cylinder electric wrap angle worm drive shaft, corners integrally connected with the cylinder axis of the structure.
 3.Preheat the cylinder after each roll-off grinding and precision grinding hard chrome plating, improved finish reduces friction, durable.
 4.With electric adjustment corners, corners can be adjusted within the range of 60-270 Degree, can effectively adjust the paper heated area.
 5.Preheat the cylinder head using the butterfly design can improve the performance of the pressure cylinder; using steam heating to ensure uniform heating paper.
 6.Corners motor with planetary cycloid pin wheel motors, and a good self-locking performance.
 7.Electrical components centralized control, its components: use Shinaide brand,West Germany.
8.Bearings are made of: Harbin Bearing.
9.Pneumatic components, rotary joints, metal hose: AirTAC selection, Tengzhou Jin Xuan genuine products.

Product Details:

1.Paste glue roller and fixed roller with 45 steel, quenched the surface, the hole machining; do homeostasis surface grinding roller body engraved with pit-style textured, gluing evenly and consume less plastic.
2.PLC touch screen,heavy type,Squeegee roller surface grinding and hard chrome plated.
3.Remaining over the paper guide roller shaft and hard chrome plated.Platen roller up and down adopt pneumatic control, easy to operate.Glue the gap between the roller and roller squeegee using manual or electric inverter control.
4 .Automatic cycle for glue, glue to prevent sedimentation.
5.Preheat cylinder using Q235B container board, produced by professional manufacturers of pressure vessels, the preheating device, can accelerate the glue paste.
6.Bearings: Harbin Bearing.
7.Electronic components, accessories: adopt Shineider brand.
8.Pneumatic component,rotary joints,metal hose: AirTAC selection, Tengzhou Jin’xuan genuine products.